 |
|
|
 |
 |
|
DOWNLOAD THE BETA VERSION OF THOMAS'S COLOR CAMERA SOFTWARE (PC WINDOWS) Compatible with ANY USB CAMERA, AND SOON TO BE V2 CAMERA BETA so BE WARNED....DOWNLOAD ===> http://evosapien.com/robosapien-hack/knitsu/Evo.exe
HERE IS THE LINK TO THOMAS VIDEO, WHICH SHOWS A MINI V2 BEING TRACED BY THE PROGRAM 3.78 WMV Movie CLICK HERE
HERE IS A VIDEO OF MY SOFTWARE, I COULDNT ENCODE IT GOOD ENOUGH SO I HAVE TO FIND A NEW WAY TO ENCODE IT, THIS MIGHT BE ADDED ONTO THOMAS’S Vision PROGRAM, so users can create their own Object’s for their V2 to recognize, CLICK HERE (1.7 mb)
|
 |
 |
|
Green and Red LED Lights added to the Eyes of Robosapien V2, for a color test...
Determinded we needed UBLED or Some sort of Brighter LED to emit through mask/shielding, unless modifying the mask with a clear case, and inner back mesh...... to hide the inner boards from “view”
|
 |
 |
|
Comming Soon Modified Tri Color LED Eye’s programmed to Switched on Robosapiens upper back pack area.... Access Panel Interface for V2 - Hackers can remove a piece of plastic to easily maintain wires, or objects going inside v2 ;-) even drill holes in this peice screw it back on and put wires through it or a switch on the object... ;-) like a Volume Trim,Switch or sensor’s on/off switchs
|
|
|
 |
 |
|
underneith that black shaded area is a shielded peice of plastic, that you can remove once you take of the front and back shell to V2. this is good for mounting objects to and through to different parts of the robot let alone a nice little cubby hole to go smoothly down with a backpack of some sort.... with wires comming out of the top... going into the V2
|
|
|
 |
 |
|
GLITCHING - we can’t limit how far RS V2 can actually Lean Forward, or Lean Backward on his controller, due to restrictions programmed into him.. for balance problems.. if we bend him all the way forward to bend over, he does not fall over, which doesnt alow us to pick up small objects from the ground ........unless their on a table or unless you actually do the sequence on the controller (ARM SIDE SHIFT + B) , then it will move it’’s body down lower and do the sequence to pick up an object from a very low position....
- When this happens you can press STOP on the controller, - His body will now be lower then you could have bent him using the Controller
Now Dont go bending his body lower or higher, as he will just move his body automatcially up to the :”Clear Zone” which is higher then your V2 already is... all you can do is sway side to side.... lean forward/backward, and ofcourse have your full limits of your hands to pick up and object....
I will post pictures and video’s of this sequence, as I find it to be a nice game of Tony Hawk on the Ps2,
|
|
|