http://www.robocommunity.com/article/11789/Interview--The-Robo-Obsessions-of-Hacker-4mem8/;jsessionid=D0FD17E9DFFF1E0AF8CF5E30822B4B3D

By Eric Brandt Posted August 25
You know him by his cryptic nickname: RobosapienV2-4mem8. And we admire him as the ultimate hacker-diarist. I wondered outloud: "What kind of mind takes up that soldering iron so fiercely, night after night, to modify WowWee bots in such twisted ways?"

Well I have had to do an errata on my power supply, Sorry if this has caused any problems to anyone. The final P/S has 9v for driver board,6v for brain, 3v and 6v for my 35mw green and 200mw red laser's. Also 4.5v and 5v for later add ons. The P/S has now been installed on my robotic base and connected to RSV2 and is working great with no over heating. Next I will be utilizing RSV2's foot and tilt sensors intergrating them into the bumper system on my robotic base.I am also looking at using the two spare geared foot motors in conjunction with the tilt and foot sensors. Watch this space.

I now have my LM350T's variable voltage regs and will start building my P/S for conversion from 12v to 9v 6v and 3v to power RSV2 and lasers from my robotic base.

Here are some of my current Robotic projects, All of these are ongoing projects and will be updated as and when I get time.

http://img409.imageshack.us/img409/4830/er1fullrv4.jpg

ER1 in it's standard form, Mine has been modified from this pic.

http://img169.imageshack.us/img169/2940/pict0501mb9.jpg

Modified ER1, quite a difference.

http://img80.imageshack.us/img80/1949/email4mem8robotandme001b9hp.jpg

My 4ft 6in 4mem8 Robot has been with me now for a number of yrs and ongoing project.

http://img487.imageshack.us/img487/3064/emaillightandmouthhack0050jq.jpg